Thursday, July 4, 2019

Operations: Daily Check of Cars

So one of the most important pieces of paperwork on my railroad, and one that most other layouts don't need, is the Daily Check of Cars.

The railroad, of course, operates to make a profit (hopefully) and for freight that happens in three primary ways. The first is the charges collected for actually moving the freight. This is basically the same thing as the price paid to ship via UPS, FedEx or the USPS.

This, of course, is a primary business of the railroad, and for most roads through history comprised more than 50% of the railroad's revenue. The New Haven was unusual in that passenger traffic, much of it related to commuting to NYC or Boston, was a significant part of the railroad's revenue. Another reason, though, was the nature of the NH's freight business, since they returned a significant portion of foreign cars empty. That is, there wasn't enough originating freight business to fill the cars emptied at their destinations. The have to pay the expense of moving such cars off of the railroad, but don't derive any income from an empty car. Furthermore, they have to pay a per diem daily rate for any foreign car on the road after midnight. So the goal is to get empty cars off of the railroad as quickly as possible.

This is, of course, the case for every road. So you'll see a pattern in freight movements. Inbound through freights are made up starting just after midnight and, as much as possible, reach their classifying yards by early morning. Then local freights are assembled, to go out and back, so their loads and empties will make the outbound through freights by early evening. The schedules are designed so the outbound through freights will be able to hand off their cars to connecting roads before midnight, thus avoiding another day of per diem charge on all of those cars.

While the NH is paid a per diem charge on each of their cars that is on another road, car routing rules require that foreign cars must be given priority loading over home road cars for destinations off of the home road. While the amount of compliance varied over the years, it did mean that many roads like the NH had relatively small rosters (about 10,000 cars) because they always had a surplus of foreign road empties to fill.

The railroads offset the per diem charges with a demurrage charge. When a load or empty is delivered to an industry, they have 24 hours to load or empty the car. After 24 hours, they are charged a demurrage fee. In part this is to offset the per diem charges that the railroad will pay. But they were also in place because industries found that freight cars made good temporary warehouses, rather than building or renting such space elsewhere. Even with the demurrage fees this was an issue, because they were still considerably cheaper than the cost of warehousing elsewhere. The container business today embraces this business model, and by separating the car that moves the container with the container itself, the railroad doesn't find itself with a car shortage as often happened in the past.

Anyway, I have two NH forms that are designed to address tracking the cars that are located within a town (station):


The first is form 546-2, The Daily Yard Check. I got this page from George Ford, a former operator/agent on the New Haven. So I know it's a New Haven form, even though it has no railroad information. This is clearly a report to record when each car is delivered and released from the station.

In addition, I have form 1480-10, Report of Cars on Hand:

This has instructions at the bottom, that records all of the cars on hand on the 1st and 16th of the month, which is to be forwarded to the Car Service Department. At the time, of course, all car movements were recorded by hand and reported daily so the Accounting Department could report for per diems.

The information on both is similar, but you can see on the second report that the Car Service Department is particularly interested in cars that have been on the railroad for more than 48 hours. Of course, a report filed twice a month won't be used for accounting purposes, and this report isn't provided to the Accounting Department. I think it was used in much the same manner as the national 1% waybill sample, to find patterns and ways to improve the efficiency of the car movements. I don't recall right now where the statistic is, but I recall a report that indicated a freight car on the New Haven moved something like only 28 miles a day, on average.

Of course, on my layout I don't need to report to the accounting or car service departments. But I do have an agent that needs to know what cars are on hand in town, and which cars are ready to be picked up. Joseph has confirmed that the same type of report is still filled out today, at the end of the work day, ready to start the next work day.

And I was just able to get a book of the Daily Yard Check (546-2) and it's quite interesting. First, I got the title of the form from another booklet. But the actual title is the "Daily Check of Cars at..."


As you can see, there is still no New Haven name on it. In fact, it has a space to fill in the specific railroad. It's the same form, and the same form number as the individual sheet I already had.

It also provides the instructions on the inside cover:

Now you can see that this is to be done by 7:00 am, or as close to it as possible. But I think that since the switching crew was a one-shift job, that might have been done at the end of the work day, as Joseph said it is still done now.

But it does provide some interesting possibilities. First is that it takes the Agent 10-15 minutes to get settled and start providing work for the switching crews, maybe a little longer. In addition, the Daily Check of Cars isn't needed until after the inbound cars, especially the priority moves, are addressed first. That is, the Agent writes out switch lists for these cars so the crew can start sorting them, and deliver the priority cars right away.

One option, then, would be to have operators first take the job as a clerk, and fill out forms to be provided to the Agent about the cars on hand. A benefit of this approach is that the operators (who will soon be the switching crews) will also get a lay of the land, learn where the industries are, and see what work to expect during the day. By the time they finish that, the Agent will have work for them, and can then take those lists and compile them into the Daily Check of Cars, as the real Agents did.

Was this how it was done? Well, in New Britain it appears the Agent was on duty at 5:15 am, so the clerks could be busy compiling that report for the 7:00 am deadline. In the meantime, the Agent would have had time to get switch lists prepared for the cars left overnight. I don't know what time the crews started, although I know the first trick on the New Haven was 7:00-3:00. I'm trying to dig up more information about when the Freight House opened as well. This matters because it will need empties to load, probably before they open. Empties would be requested from the Card Service Department, and presumably be delivered overnight.

As I noted before, there is a pattern to the way freight moves on the railroad. It's quite efficient, and is done the same way pretty much every day. So would the report be completed at the end of the Agent's day, which in New Britain was 9:00 pm, or first thing in the morning? What time do the crews start? Do they start at the same time, or are the two crews staggered?

These need to work with the realities of operating a model railroad too. Most crews probably don't want to wait too long before they get to start operating. For example, if the two switch crews are on different schedules, and the second crew doesn't start until noon, but the session starts at 7:00 am, then I need to find something for the crew to do for an hour an 15 minutes while waiting for their job to start. So being a station clerk might work well.

Most likely the Daily Check of Cars was not used by the Agent for car movements. They have the waybills and Home Route cards that come in with the trains, and, while I haven't located New Haven forms yet, there must have been one for recording requests for empty cars, and also a process to release cars from an industry.

Part of the art of designing a model railroad operating session is in condensing the processes, paperwork, and people into something more manageable, and also something that ultimately translates into moving cars around the layout. But by learning how the railroad actually operates, rather than designing the processes for my operating sessions around other model railroad operation schemes, I can more closely follow the prototype, and also choose what compromises or changes work best for us.

8 comments:

  1. Hi, I would like to know what should be in column Hour Checked. Thank you. Richard

    ReplyDelete
  2. I think it's just that - the hour that the check was made. It's supposed to be done as close to 7 AM as possible, but it may be one clerk checking the tracks.

    In a small town like, say, Rocky Hill, the check wouldn't take very long since there were only a few tracks where cars would be spotted. In a town like New Britain or Plainville, there were a lot of industrial tracks, plus the yard tracks, and it would take some time to complete the daily check.

    ReplyDelete
  3. Thank you for explaining.

    Because I would like to use those forms for my layout I would like to know those two things:

    1. Were those forms printed for foreign and private cars only, or also for home cars?
    2. What should be in columns 9-13? For example, inbound car arrived on Monday and was unloaded same day. I suppose that in column 9 will be 1. If car will stay in yard on Tuesday, then in the end of Tuesday, column 9 will show 1 and column 10 also 1 (one day loaded, one day empty). Am'I right? Or there will be 1 in column 9 and 2 in column 10 (because car was actually one day loaded and two days empty)?

    And the last example, what if car arrived on Monday, was unloaded also on Monday and on Thursday was assigned to shipper (held for loading). I suppose column 9 will show 1, column 10 show 2 and column 11 show 1. If car wouldn't assigned on Thursday, then column 10 would show 3...

    ReplyDelete
    Replies
    1. It would be for all cars, foreign or home. It's basically a record of all cars on hand at that point in time. Instead of thinking "days" think about the process and "checks."

      The more involved form was completed on the 1st and 16th of the month, presumably utilizing the daily check book as a source to identify how long the car had been there.

      Car arrives on Monday (after the daily check) and is unloaded. Tuesday morning the car is there and empty. Empty, 1 day. If it is still in the yard Wednesday morning (it shouldn't be), it would then be day 2, still empty. So 2 days (checks) empty - no days (checks) loaded.

      One thing we've learned about the Valley Line is stock cars for the slaughterhouse were usually unloaded while the crew waited. So a stock car comes in Monday after the daily check, is unloaded, and then goes back out on Monday. It would never appear on the daily check (at least not in Middletown. If it's in Cedar Hill on Tuesday morning, it would be captured as an empty there).

      The Held for Loading column would be if the same industry retained the car, since this would be important for billing purposes for the per diem.

      A car is delivered to Stanley Works on Monday and unloaded. Tuesday morning it's 1 day empty (the first time it has appeared in the check). The car is still there on Wednesday because Stanley Works has decided to keep the car (or requested a car, and was told to keep it), so now it's 1 day in held for loading too.

      If the car was to be loaded at a different industry, then it would have to appear on a new line since it would be in a new location/consignee. This is clearer on the daily check form.

      A car is placed at Stanley Works on Monday. It's unloaded, and on Tuesday morning's check it's empty, so 1 day empty. Stanley Works releases the car, so the NH can pick it up. The date/time released is completed (which may be different from when it is actually picked up). If Fafnir Bearings requests a car, and the Car Service Department assigns this one, then it will need a new line since it was released by Stanley Works.

      If you right click on the photos and select open in new tab/window, you'll get a higher resolution version that you can download.

      Delete
    2. Hi again, thank you for the great explaining and your patience. I like to use paperwork which gives "my railroad" much more reality.

      When you will have a little bit of free time, I would like to ensure myself:
      1. If inbound car would stay loaded say on receiving track to Tuesday, column 9 (loaded) would be 1?

      2. You wrote: "A car is delivered to Stanley Works on Monday and unloaded. Tuesday morning it's
      1 day empty (the first time it has appeared in the check). The car is still there on
      Wednesday because Stanley Works has decided to keep the car (or requested a
      car, and was told to keep it), so now it's 1 day in held for loading too."
      Does it actually mean that Stanley Works decided to keep the car already on Tuesday?
      Because I assume it would be on Wednesday, column 10 would be 2…

      3. I suppose column 13 is similar to column 10. If car is requested and assigned to the same or another shipper, and also loaded the same day, another day will be 1 in column 13, right?

      Richard

      Delete
    3. Not a problem, it's fun to figure this stuff out.

      Example 1 (I'll provide a detailed flow).
      7 am - Daily Check is completed.
      9 am - car is delivered.
      7 am next morning, Daily check, car is loaded so its recorded as loaded for...1 day. The way I'm thinking is that if you look at the prior day's report, the car wasn't there yet.

      Example 2
      7 am Monday Daily Check
      9 am Monday, car is delivered to Stanley Works
      4 pm Monday, car is unloaded
      7 am Tuesday Daily Check. The Car is listed as Empty (because it is) and 1 day (it didn't appear on the Monday report because it wasn't there yet).
      3 PM Tuesday, Stanley Works requests and empty and is told to keep the car.
      7 AM Wednesday Daily Check, the car is now Held for Loading. Since it wasn't in that status on the Tuesday report, this is day 1 of Held for Loading.
      7 am Thursday Daily Check, the car still hasn't been loaded so it's still Held for Loading, and now it's the second check where it has been in that status, so 2 days Held for Loading.

      In other words, the Daily Check records the current status of the car (Loaded, Unloading, Loading, Empty, or Held for Loading, Released, Awaiting Movement), and the number is always 1, unless it was in the same status on the day(s) prior.

      Example 3
      If the request, assignment, and loading are all done on Monday, after the Monday Daily Check report has been completed, then on Tuesday the car will be in the status of Awaiting Movement, and since it was not in that status on the Monday Daily Check, it is day 1 of that status.

      Delete
  4. Thanks again! Just one question belongs to example 3: is there any difference if loaded car is on a shipper’s track or on departure yard track? If I got it well, example 1 concerns column 9 - Under Load. But where the column 12 - Loading will be filled out? I suppose if the loading of the car started on Monday 3 pm and was not finished that day, Tuesday morning check will record 1 into the column 12. But I’m not sure about the case when car was loaded on Monday 3 pm (so loading is done) and on Tuesday check is still on shipper’s track. Will it have status Awaiting Movement at this time? Or it gets this status only when spotted on departure track?

    In other words, what Awaiting Movement status exactly mean? Car is loaded on shipper’s track and waits for pickup and then set out on departure yard track, or car is already on departure track and waits for pickup by outbound/through train?

    Richard

    ReplyDelete
    Replies
    1. "Loading" and "Unloading" would be for cars that have started being loaded/unloaded but haven't completed the process when the check is made.

      An outbound car is Awaiting Movement once it's unloaded/loaded and released to the railroad.

      In other words, the industry is done with the car, and now it's just waiting for the railroad to move it. It won't matter if it's on an industry track, yard track, etc. It's ready to roll.

      Cars inbound to that station (town) won't be in an "Awaiting Movement" status. A loaded car sitting on a storage track waiting to be delivered to the industry would be "Under Load." An Empty car waiting to be delivered to an industry would be "Empty."

      Delete